LDPE HP4024WN
Mã Sản Phẩm: LDPE HP4024WN
Description
HP4024WN is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024WN contains slip and antiblock additives.
Melt Flow Index (MI)
4
Material Group
LLDPE FILM
Producer
SABIC
Origin
Arabic
Application
Types of films,…
TYPICAL APPLICATIONS
HP4024WN can be used for high clarity laundry bags, textile wrapping films, produce bags, zip lock bags and master batch.
Properties
Values
Units SI
Test methods
Physical
Melt flow rate (MFR)
190°C/2.16 kg
Density
4
g/10 min
ASTM D1238
923
Kg/m³
ASTM D1505
Formulation
Slip agent
Anti block agent
Mechanical
Optical
Dart Impact Strength 2 g/µm ASTM D1709
ASTM D1003
ASTM D2457
Haze
Gloss
at 45°
%
%
6
68
Film
32
24
265
600
10
10
277
224
10
14
MPa
MPa
%
%
MPa
MPa
MPa
MPa
g/µm
g/µm
°C
Tensile Properties (1)
stress at break, MD
stress at break, TD
strain at break, MD
strain at break, TD
stress at yield, MD
stress at yield, TD
1% secant modulus, MD
1% secant modulus, TD
Tear Resistance
MD
TD
(1) Properties have been measured by producing 30 μm film with 2.5 BUR using 100% HP4024N.
ASTM D882
ASTM D882
ASTM D882
ASTM D882
ASTM D882
ASTM D882
ASTM D882
ASTM D882
ASTM D1922
ASTM D1922
Vicat Softening Temperature
92
ASTM D1525
PROCESSING CONDITIONS
Typical processing conditions for HP4024WN are: Barrel temperature: 160 - 190°C, Blow up ratio: 2.0 – 3.0
HEALTH, SAFETY AND FOOD CONTACT REGULATIONS
Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, Additional specific information can be requested via your local Sales Office. DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.
STORAGE AND HANDLING
Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.
DISCLAIMER
The information contained herein may include typical properties of our products or their typical performances when used in certain typical applications. Actual properties of our products, in particular when used in conjunction with any third party material(s) or for any non-typical applications, may differ from typical properties. It is the customer's responsibility to inspect and test our product(s) in order to satisfy itself as to the suitability of the product(s) for its and its customers particular purposes. The customer is responsible for the appropriate, safe and legal use, processing and handling of all product(s) purchased from us. Nothing herein is intended to be nor shall it constitute a warranty whatsoever, in particular, warranty of merchantability or fitness for a particular purpose. SABIC as referred to herein means any legal entity belonging to the group of companies headed by Saudi Arabia Basic Industries
