LDPE C150Y
Mã Sản Phẩm: LDPE C150Y
Description
ETILINAS PETLIN LDPE C150Y is a low density polyethylene resin for general purpose and thin film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for blown film process. This product meets the United State Food and Drug Administration (US FDA) criteria for food contact use as specified in CFR 177.1520 (c) 3.1a & 3.2a and Commission Regulation (EU) No. 10/2011.
Melt Flow Index (MI)
5
Material Group
LDPE FILM
Producer
PETLIN
Origin
Malaysia
Application
blown film
CHARACTERISTICS include:
• Low gels • High drawdown
• High clarity and gloss • Good sealability, high slip and high antiblocking
APPLICATIONS include:
Thin gauge film for: textile, laundry, dry cleaning, garment; crosslinked foams; zip bags.
RECOMMENDED GAUGES:
15 - 60 microns
TYPICAL DATA:
25 microns film
Properties
Values
Units SI
Test methods
General
Melt Flow Rate, I2
Nominal Density Melting Temperature Vicat Softening Temperature
Tensile Strength at Break, (MD/TD) Elongation at Break, (MD/TD) Elmendorf Tear Strength, (MD/TD) Dart Impact Strength
g/10 min
Kg/m³
°C
°C
MPa
%
g/25µm
g
ASTM D 1238;B @ 190°C, 2.16kg ASTM D 792
ASTM D 3417
ASTM D 1525 (Load: 1 kg; Heating rate: 50°C/hr
ASTM D 882
ASTM D 882
ASTM D 1922
ASTM D 1709-15a
Mechanical
Other
5
921
111
94
15/26 610/149 30/80
86
ASTM D 1746 ASTM D 2457 ASTM D 1003 ASTM D 1894
Clarity
Gloss 45°
Haze
Typical Processing Conditio
%
GU
%
-
85
66
6.5
0.1
*The physical properties shown are typical values obtained by averaging a number of test results and small divergence from quoted figures may occur
Typical Processing Conditions
Extrusion melt temperature of ETILINAS PETLIN LDPE C150Y in the range of from 140°C~170°C depending on the type of machine. For blown film, recommended blow-up ratio of 2 to 3:1.
Low Density Polyethylene
REGULATORY
ETILINAS PETLIN LDPE C150Y complies with the following specification when processed using good extrusion practice:-
• FDA Regulation 21 CFR 177.1520 and CFR 178.2010.
• Commission Regulation (EU) No. 10/2011.
• HALAL certified.
• REACH, RoSH and SVAC.
AVAILABILITY
ETILINAS PETLIN LDPE C150Y are available 25kg bags. The product type and batch number are clearly marked on each bag.
STORAGE/HANDLING
ETILINAS PETLIN LDPE C150Y should be properly stored in well ventilated environment at a temperature of below 50°C. Prolonged or improper storage can result in deterioration of product properties. The PETRONAS Chemicals Safety Data Sheet (SDS) contains important safety information and should be viewed before using the product.
HEALTH & SAFETY
ETILINAS PETLIN LDPE C150Y is not classified as a dangerous preparation. Please refer to our Safety Data Sheet (SDS) for details on various aspects of safety, recovery and disposal of the product.
PRODUCT STEWARDSHIP
PCGB has a fundamental concern for all who make, distribute, and use its products, and for the environment in which we live. Our Product Stewardship program rests with each and every individual involved with PCGB’s products– from the initial concept and research, to manufacture, use, sale and disposal of each product.
RELATED DOCUMENTS
The following related documents are available on request, and represent various aspects on the usability, safety, recovery and disposal of the product.
Safety Data Sheet (SDS)
Statement on chemicals, regulations and standards
Statement on compliance to food contact regulations
